There are many contributing factors as to why people need crawl space mold removal in Staten Island NY. Similar to basements, crawl spaces are usually damp and lack natural day light. In general, mold needs two things to grow. A food source and moisture. Mold also thrives in dark spaces. Therefore these damp dark environments create the need for crawl space mold removal in Staten Island NY.
Thousands of homes end up needing crawl space mold remediation in Staten Island New York. A crawl space is defined as a shallow areas beneath a home that does not have sufficient height for a person to stand and are therefore not considered part of the living space of the home. Their primary purpose is to allow access to plumbing, wiring and other utilities.
There are several good reasons why crawl space mold remediation in Staten Island NY homes is so necessary. First crawl spaces are always dark, provide dampness and offer plenty of sufficient food sources for mold to flourish. One of the issues is that soil from the ground is very humid. This moisture that is produced from the soil causes mold to easily generate and grow since the natural airflow in a house is from bottom to top. This presents a need for crawl space mold inspection for Staten Island NY homeowners as this warm moist air from the ground will rise into your home, bringing up with it the mold contaminated air. It is estimated that about 60% of the air we breathe on the first floor of our home comes from the crawl space directly below. Therefore, crawl space mold inspection in Staten Island NY will help you avoid serious health issues from exposure. This contaminated air is very capable of making the residents in a house very ill. This is why crawl space mold testing in Staten Island NY is so important!
One way to avoid the need for crawl space mold remediation in Staten Island NY
is to install a Vapor Barrier along the floor
Another reason for crawl spaces mold removal in Staten Island NY is that the building materials used in the construction of your home are conducive to mold growth. Materials like wood floor joists, insulation, cinderblock walls and even the plastic plumbing pipes will often become contaminated therefore requiring a crawl space mold inspection in Staten Island NY homes.
A crawl space mold removal in Staten Island NY will vary based upon the severity of the damage and the type of building materials affected. Below is a worst case scenario of a typical crawl space mold remediation project. Bear in mind your problem may not be as severe.
Conduct a thorough attic mold inspection in Staten Island NY home.
Take attic mold testing in Staten Island NY home to determine the severity of the damage.
First it will be necessary to repair any plumbing problems and any other possible causes of moisture intrusion.
Then we must establish a proper containment system that is designed to prevent the spread of contamination to any unaffected areas of the building structure.
Then a commercial dehumidifier should be used to lower the moisture content in the air and on the building surfaces. Many times this should be installed permanently to ward off future unwanted conditions.
Air scrubbing machines are then installed in the living areas of the home to effectively suck out the airborne contaminants from the home.
Now we are ready to bag up and dispose of the contaminated insulation and debris from underneath the home.
HEPA Vacuum all contaminated wall, ceiling and floor surfaces.
Clean all contaminated wall, ceiling and floor surfaces with an EPA registered anti-microbial biocide.
Sand wood framing to remove all imbedded contamination.
Then all wall, floor and ceiling surfaces must be Re-HEPA Vacuum.
Encapsulation of all contaminated wall, floor and ceiling surfaces should be accomplished utilizing an appropriate EPA registered mold resistant sealant.
Clean and sanitize the HVAC air duct system. Mold likes to enter the duct work and this contaminated air can circulate throughout your home potentially making the occupants very sick.
Re-Insulate the crawl space, preferably with spray in foam type insulation which is much more resistant to future contamination issues.
Supply and install a plastic 6 mil. Vapor barrier on the dirt floor within the crawl space. This will provide a barrier against the grounds moisture preventing this moisture from rising up from the ground to the air underneath your home.
Return after several days to remove the air scrubber(s).
Break down and remove all containment.
Mold on the Floor Joyce's and Insulation Creates
the Need for Crawl Space Mold Removal
Staten Island NY
Since 1995 Absolutely Spotless, Inc. has offered a full range of remediation services to the homeowners of Staten Island NY. These services include Crawl Space Mold Inspection Staten Island NY, Crawl Space Mold Testing Staten Island NY, Crawl Space Mold Removal Staten Island NY, Crawl Space Mold Remediation Staten Island NY. We will come to your home literally any time of day or night that you need us to help you with your mold problems. We will also answer the phone when you call us.